Answers to Questions from Comments
The first one was regarding the front brakes for the 1993 Saleen SC and SA10. See the pics below. The 1993 SC had these brakes as standard equipment. The setup had a Wilwood aluminum hub with a custom two piece Alcon rotor which consisted of a custom "hat" section and a 13" x 1" rotor. The caliper is an Alcon "B" type radial mount. All of this resided on a modified stock Fox Mustang 87-93 V8 spindle. The spindle was modified by removing the stock caliper mounting holes, machined flat, and then drilled and tapped to accept the custom Alcon bracket. See the lower pic on how the bracket looks. That's the long answer to the question asked. The short answer is that the spindle is a modified 87-93 Fox Mustang V8 spindle.
On to 1993 #57
1993 #57 is getting some suspension pieces replaced. The struts are shot. Completely blown out and rusted. I'm going to replace them with Koni adjustable shocks and struts. I'll also remove the rear axles to put shorter axles in. I'm running a different wheel setup. It's a brand that Saleen used but only on 2-3 cars in 1993. Right now #57 is sitting on jack stands with liquid wrench soaking the bolts. The front air dam and the rear wing are off getting repainted. The front stripes were wrong and the air dam lost a battle or two with a curb.